As current MDIs contain hydrofluorocarbon propellants, it would be beneficial to find ways to reduce carbon emissions without compromising patient safety.

This lab study investigated a way to optimize the modelled lung dose per actuation while at the same time minimizing the carbon emissions from the MDI

Conclusions:

• The widely differing inspiratory flow profiles from Turbuhaler† DPI contributed to greater variability in delivered dose to the carina. 
• MDI delivery via the AeroChamber Plus* Flow-Vu* VHC resulted in significantly increased mass to the carinal region irrespective of inhalation maneuver as well as reduced oropharyngeal deposited mass which in vivo is likely to result in reduced throat irritation or thrush in the mouth and throat.

This study was presented at the Drug Delivery to the Lungs Conference, 2022.

• The FRI deposition profiles highlight that the MDI/AeroChamber Plus* Flow-Vu* VHC delivered a significantly greater percentage of drug to the lung region than either of the two DPIs, irrespective of flow rate.
• This was reflected in much higher modelled oropharyngeal deposition for the two DPIs.
• The influence of inhalation flow profile was significant for one of the DPIs.

This study was presented at the Drug Delivery to the Lungs, 2022.

Does Spacer/Adapter Device Choice Affect Delivery of a Pressurized Metered Dose Inhaler (pMDI) through a Humidified Circuit to a Simulated Patient on Mecha

Summary:

Presented at DDL 2017 in Edinburgh

• Valved holding chambers are widely prescribed to assist patients receiving inhaled medications by avoiding losses caused by imperfect coordination of inhalation and actuation and also to reduce oropharyngeal deposition.
• Regardless of whether using a solution based formulation (like Qvar) or a suspension formulation (Flovent), the use of a valved holding chamber reduced the amount of medication deposited in the mouth (oropharynx) and increased the potential for lung delivery
• This study can be used to help demonstrate the value of using a valved holding chamber for both solution and suspension formulated metered dose inhalers and for all patient populations, including adults

PRESENTED AT VIRTUAL ATS 2020

• Evaluations of inhaler use have demonstrated that mishandling of MDIs is commonplace.
• One of the most common errors is the failure to coordinate inhalation with actuation of the inhaler
• One of the reasons why VHCs are often prescribed, is to reduce the severity of this error
• This Functional Respiratory Imaging (FRI) based study assessed the likely severity of a short inhalation delay (from actuation) with an MDI alone and how it contrasted to the use with a VHC

Conclusions:

• The most efficient and effective delivery method remains that recommended in the device IFU (one actuation inhaled at a time, as well inhalation as soon as possible after actuation)
• However, this laboratory-based study has indicated that a modified common-canister protocol with an anti-static VHC as the aerosol transfer vehicle has the potential to be a viable ‘off-label’ proposition in hospital situations where there is an urgent need to conserve pMDI medication as well as avoid cross-contamination from pathogenic viruses or bacteria

Positioning of the tongue during inhaler medication delivery is something that is not thought about by either users or caregivers.

Conclusion

• The FRI deposition profiles highlight that the MDI/AeroChamber Plus* Flow-Vu* VHC delivered a significantly greater percentage of drug to the lung region than either of the two DPIs, irrespective of flow rate.
• This was reflected in much higher modelled oropharyngeal deposition for the two DPIs.
• The influence of inhalation flow profile was significant for one of the DPIs.

Asthma control and global warming are important issues that have significant impacts on human health and the environment.

It is critical however to ensure that maintaining or improving the patient’s asthma control goes hand in hand with environmental actions.

This lab study investigated how to optimize the modelled lung delivery while at the same time minimizing the carbon emissions from the MDI.

• The FRI deposition profiles highlight that the MDI/ AeroChamber Plus* Flow Vu* VHC system delivered an appreciably greater percentage of drug to the lung region than either of the two DPIs.
• The influence of inhalation flow profile was less with the MDI/VHC system and differed between the two DPIs.

The FRI deposition profiles highlighted significant differences between the VHCs on test, with intrathoracic delivery for the AeroChamber Plus* Flow-Vu* VHC system being almost double that of the other two VHC systems and being similar to the MDI alone with perfect coordination

This study was presented at the Drug Delivery to the Lungs Conference, 2022.

RDD 2020 - E-Poster Presentation

COPD is a chronic and progressive disease that requires regular self-administration of inhaled medications. However, as the disease progresses, reduced respiratory muscle strength may prevent patients from generating sufficient inspiratory effort to effectively use dry-powder inhalers (DPIs) [1, 2]. In contrast, patients can inhale slowly or breathe tidally from a pMDI with VHC without the need to coordinate with inhaler actuation [3].

This study aims to determine if a portable VHC could improve MART therapy effectiveness outside of the home.