AEROTRACH PLUS* Anti-Static Valved Holding Chamber
For use with an MDI by tracheostomy patients. This device is designed as a slip fit onto the 15 mm connector of the tracheostomy tube.
The AEROTRACH PLUS* Anti-Static Valved Holding Chamber (VHC) is specifically designed for the delivery of metered dose inhaler (MDI) medications for tracheostomy patients.
The AEROTRACH PLUS* Anti-Static Valved Holding Chamber (VHC) is quick and easy to comfortably connect to standard 15mm tracheostomy tubes.
- Use of a chamber improves delivery of medication1
- Ready to use directly out of the package – time saving with no pretreatment needed
- Anti-static improves the reliability of medication delivery2.
1. Federico Lavorini, et al. Targeting Drugs To The Airways: The Role Of Spacer Devices. Expert Opinion on Drug Delivery 2009;6(1):91-102.
2. Jason Suggett, et al. Use Of Valved Holding Chambers Without Pre-conditioning And The Influence Of Anti-static Materials. Journal of Aerosol Medicine and Pulmonary Drug Delivery 2014;28.
- Asthma Management
- Bronchiectasis
- COPD
- Cystic Fibrosis
- Inhaler
Product Overview
Why use an inhaler always together with an AEROTRACH PLUS* spacer?
Use of a spacer simplifies coordination of MDI actuation and inhalation, reducing aerosol losses with poor hand-breath coordination.3
3. Douglas S Gardenhire, et al. A Guide To Aerosol Delivery Devices for Respiratory Therapists, 5th Edition. American Association for Respiratory Care 2023.
Care Instructions
Use Instructions
-
Step 1:
Remove the cap from the inhaler. Shake the inhaler immediately before use as per the instructions supplied with it.
Cleaning
This anti-static chamber can be used right out-of-package and then cleaned daily.
-
Step 1:
Remove back piece only. (Do not remove the trach adapter assembly.)
Note: If you notice medication build-up in your chamber, wipe the inside of the device gently with a soft cloth.
Disinfection
This chamber can be disinfected each day. Prior to disinfection, follow cleaning instructions. Do not dry or reassemble the device.
Step 1
Soak the two parts in a 1:10 bleach to water solution for 30 minutes. Rinse parts in clean water. Note: You may substitute an enzyme solvent or VitalOxide† for the bleach solution. Follow the disinfectant instructions for use.
Step 2
Shake out all excess water and allow to air dry in an upright position. Ensure the parts are dry before reassembly.
Step 3
Replace backpiece when unit is completely dry.
Refer to the instructions for use for additional information.
Data and Efficacy
Scientific and Performance Evidence
Trudell Medical International has an enviable history of strong leadership in creating innovative medical devices that enhance the quality of life for people of all ages - all backed by science and clinical evidence.