AEROTRACH PLUS* Anti-Static Valved Holding Chamber
For use with an MDI by tracheostomy patients. This device is designed as a slip fit onto the 15 mm connector of the tracheostomy tube.
- Asthma Management
- Bronchiectasis
- COPD
- Cystic Fibrosis
- Inhaler
Product Overview
Why use an inhaler always together with an AEROTRACH PLUS* spacer?
Use of a spacer simplifies coordination of MDI actuation and inhalation, reducing aerosol losses with poor hand-breath coordination.3
3. Douglas S Gardenhire, et al. A Guide To Aerosol Delivery Devices for Respiratory Therapists, 5th Edition. American Association for Respiratory Care 2023.
Care Instructions
Use Instructions
-
Step 1:
Remove the cap from the inhaler. Shake the inhaler immediately before use as per the instructions supplied with it.
Cleaning
This anti-static chamber can be used right out-of-package and then cleaned daily.
-
Step 1:
Remove back piece only. (Do not remove the trach adapter assembly.)
Note: If you notice medication build-up in your chamber, wipe the inside of the device gently with a soft cloth.
Disinfection
This chamber can be disinfected each day. Prior to disinfection, follow cleaning instructions. Do not dry or reassemble the device.
Step 1
Soak the two parts in a 1:10 bleach to water solution for 30 minutes. Rinse parts in clean water. Note: You may substitute an enzyme solvent or VitalOxide† for the bleach solution. Follow the disinfectant instructions for use.
Step 2
Shake out all excess water and allow to air dry in an upright position. Ensure the parts are dry before reassembly.
Step 3
Replace backpiece when unit is completely dry.
Refer to the instructions for use for additional information.
Data and Efficacy
Scientific and Performance Evidence
Trudell Medical International has an enviable history of strong leadership in creating innovative medical devices that enhance the quality of life for people of all ages - all backed by science and clinical evidence.